|
Grain-sawdust-woodchips cyclone |
 |
 |
 |
|
Written by Administrator
|
|
Monday, 28 December 2009 12:04 |
|
The Vacteck twin power cyclone vacuum has been designed for the recovery of grains, sawdust, powders, woodchips and most light waste that would normally clog up a vacuums filter. The cyclonic action prevents 99% of the dust and waste from ever reaching the dust bag. The power plant is the Vacteck twin electric that can be used as a standalone vacuum when not attached to the cyclone hopper.
| {qtube vid:=5taXEru5ovg w:=455 h:=365 c1:=064455 c2:=552288 b:=1 rel:=1 ap:=0 cl:=class id:=id} |
|
 |
|
|
|
 |
| The system comes in two parts. The hopper cyclone and the twin electric wet dry vacuum. |
The twin electric vacuum can be used as both the power for the cyclone and as a stand alone wet dry vacuum
|
 |
 |
| The intake cyclone is attached to the top of the capture hopper. |
The hopper tank has internal brackets that fit to supplied wall clips. This enables the tank and hopper to swivel 180 degrees.
|
 |
 |
| The system can be supplied with tools for wet and dry vacuuming. |
The simple pressure clip keeps the dump hatch closed.
|
 |
 |
A simple releaze of the pressure clip and the grain or sawdust will be dumped into a capture pale.
|
The system can be setup with either 40mm capture hose and tools or 50mm hose and wand.
|
|
The filter remains largely untouched which allows full vacuum power for much longer periods and less stoppages for filter cleaning.
|
This includes the wet dry Vacteck twin electric vacuum. Hopper with Vacteck cyclone, 3 metres of 40mm suction hose and a stainless steel 1.5 metre probe, power transfer hose and couplings. Brackets for wall mounting included. code: VTGS40
Upgrade to 50mm suction hose and a 50mm chrome wand. code: VTGS50
Tools for standard vacuuming, squeegee blade, brush head, 40mm wand & crevice tool. code: VTT40
|
 |
This includes Hopper with Vacteck cyclone, 3 metres of 40mm suction hose and a stainless steel 1.5 metre probe, power transfer hose and couplings. Brackets for wall mounting included. code: VTGS/HOP40 |
 |
This includes the wet dry Vacteck air powered vacuum. 35-50 cfm or air consumption. Hopper with Vacteck cyclone, 3 metres of 40mm suction hose and a stainless steel 1.5 metre probe, power transfer hose and couplings. Brackets for wall mounting included. code: VTGS/AIR40
|
|
|
Last Updated on Wednesday, 24 November 2010 12:32 |
