|
Written by Robert Whittle
|
|
Sunday, 23 March 2008 |
The TrenchSucker 1400 is a high airflow and high vacuum wet dry vacuum unit. With 15" of vacuum it has a huge power ratio that gives it the power to recover industrial sludge, oil and heavy waste and thick industrial slurry. Needing only 23-27 CFM of air this unit has perfect application for mobile service trucks. With a simple twist of two wing nuts, the filter can be placed over the float valve assembly and turn the unit into a dry recovery system.
 | The TrenchSucker 1400 is mounted on a 205/16 heavy gauge 205 litre steel drum lid, fitted with a lever locking ring. |  | When the Trenchsucker is mounted on its lid and a 205 drum, fitted with the heavy duty drum mover and rotater, it is the perfect tool for heavy machinery workshops.
|  | The TrenchSucker 1400 has the power through its high 15" vacuum and high airflow for thick industrial slurry.
|
The wet only version of the TrenchSucker screws into the second 50mm bung on the 205/16 gal lid.  | | Trenchsucker 1400 W resting on a 205/16 gal lid with 2 x 50 mm bung holes |  | The DAVTS1400 is perfect for industrial sludge recovery.
|  | | The trenchsucker can work with a variety of hoses and suction wands. Here a 50mm anti-static hose and wand set has been attached. |  | | The above photo shows the Trenchsucker 1400 with a 40mm hose and a 2 piece (2 metre) metal probe for trench work. |  | | The DAVTS1400 is a wet and dry unit. To remove the cartridge, like all Vacteck wet/dry systems, it is a simple proceedure to remove the cartridge, just like in the photo of the 174Quad system and its 4 cartridges. |
|
|
Last Updated ( Tuesday, 22 April 2008 )
|
Trenchsucker1400
Tri-Vac Mud Monster
Rapid Spill Control
Easy to Use
