|
Roof insulation vacuum systems |
 |
 |
 |
|
Written by Administrator
|
|
Wednesday, 25 November 2009 22:49 |
 |
Vacteck Vacuums produce the Taipan power system for use in the roof cavity vacuum units. The energy is supplied by a 31HP Briggs and Stratton petrol motor linked to a 450 cfm Gardner Denver positive displacemnet blower vac. This skid mounted power pack has a 5 micron washable filtration tower with slide gate evacuation port. This heavy industrial power pack gives impressive power and allows the use of 50 - 80 metres of suction hose up to 100 mm (4") in diametre.
- Silencer down to 80dBa
- Electric start with control levers
- 40 litre petrol tank
- 31 HP Vanguard motor
- 450 cfm blower vac
- 12 volt battery
- 15" Hg 500 Mb vac power
|
|
|
The Vack N Sack system developed by Vacteck Vacuums uses a specially designed sack to capture all of the roof insulation and approximately 98% of the dust. The remaining dust goes through to the large Dust Shaker cabinet which filters down to .3 microns at an efficiency of 99%. |
|
|
The Dust Shaker Cabinet is the heart of the system. Without efficient filtration then the whole system would have to be stopped regualrly for cleaning. Vacteck Vacuums are the only company in Australia using this style of heavy industrial filtration with the powerful blower vacuum systems. |
| Click to see the tank and the sack |
|
 |
Description: This version of the Vac n Sack positive displacement blower roof insulation vacuum is fitted with a Donaldson Torit dust collector which is essential in those areas that has blown in cellulose roof insulation and a thick layer of dust. The standard panel filter may load too quickly so the DT Dust cabinet with shaker will give extended life and longer running times.
Power: The system is powered by a 31 horse power Vanguard (Briggs and Stratton) petrol motor and a 450 cfm Gardner Denver blower producing in excess of 450 cfm @ 50% vacuum.
Hose length, diametre / anti-static: The hose supplied with this system is 40 metres of 100mm suction hose.
Build Time: Once the deposit has been received and the tray size confirmed, the build should take approximately 4 weeks. Installation can be acrried out at our Gold Coast factory or the system can be shipped anywhere in Australia and self installed.
Sacks: Vacteck Vacuums can supply any quantity of Vac n Sack sacks at competitive prices. Each sack has a cubic capacity of in excess of 3 cubic metres as the cellulose roof insulation dramatically compresses when recovered.
Exhaust: The exhaust system is completely filtered with a HEPA filter to comply with all local and government regulations for exhaust emmissions.
Filtration: The system has a 4 stage filtration system that captures 99.9 % of all dust and fibre leaving the HEPA exhaust as the last guard before exhaust to atmosphere.
|
|
|
|
|
Last Updated on Sunday, 21 February 2010 02:50 |
